Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Headlight Bulbs on a Toyota Venza

Model: Toyota Venza MK  1, Av10 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Headlight bulb

See other generations:
Video tutorial

This guide will show you how to disassemble and replace the headlight bulbs on a Toyota Venza, following the instructions below. First, open the hood and begin removing the front bumper by taking out all the plastic clips and unscrewing the mounting screws; then you can remove the headlight assembly by disconnecting the electrical connector for the lights, as shown in the video.

At this point, you will be able to replace both the low beam bulb and the parking and turn signal lights; finally, reassemble the front headlight assembly!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Replacing the Headlight Bulb on the Toyota Venza
Replacing the Headlight Bulb on the Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) Today, in this video tutorial, learn how to remove and replace the headlight bulbs on the Toyota Venza. First, open the hood of your car and start by…
Replacing the Headlight Bulb on the Toyota Venza
Replacing the Headlight Bulb on the Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) In this video, we will see how to disassemble and replace the headlight bulb on the Toyota Venza by following these simple steps. First, open the hoo…
How to Replace the Headlight Bulb on a Toyota Venza
How to Replace the Headlight Bulb on a Toyota Venza
Toyota Venza (2008-2017 / MK  1, Av10) To replace the headlight bulb on a Toyota Venza, open the hood to access the components inside the engine compartment. Locate the protective cover in…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos