Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Corolla
  6. : How to replace the battery of the Toyota Corolla

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 2 - Years 2000-2007
Part: Battery
Operation: How to replace the battery of the Toyota Corolla

If the battery of your Toyota Corolla Mk2 is now too worn out and you want to replace it, you just need to carefully read the following mini guide and put into practice what is described so that you can replace it yourself and without any difficulty. First of all, completely turn off the car and lift the front hood. Locate the battery on the right side of the engine compartment and unscrew the safety screws with a special key. Finally, disconnect the two terminals and gently pull the battery towards you in order to remove it completely. At this point, you can proceed with the eventual replacement.


Posted on 3 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos