Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Which is the fuse for the cigarette lighter socket in the Toyota Auris?

Model: Toyota Auris E150 - Years 2007-2012
Part: Cigarette lighter

If the cigarette lighter socket of our Toyota Auris has suddenly stopped working, we can first check the status of the corresponding fuse, whose location is indicated in this video. As shown, the fuse in question is located in the box inside the cabin, precisely below the glove compartment on the passenger side. It is labeled with the code F23 and is a 15A fuse. If it is faulty, make sure to replace it with a replacement of equivalent specifications and always operate with the vehicle turned off, otherwise we may damage the socket itself.

Posted on 10 September 2023 by ScegliAuto

Video tutorial

Related tutorials

What is the diagram of the engine compartment fuse box in the Toyota Auris?
What is the diagram of the engine compartment fuse box in the Toyota Auris?
Toyota Auris (2012-2018 / E180) In this video we can see the diagram of the fuse box in the engine compartment of the Toyota Auris, useful in case a device is malfunctioning and we …
What is the fuse diagram on the Toyota Auris?
What is the fuse diagram on the Toyota Auris?
Toyota Auris (2007-2012 / E150) In the event that one or more devices on our Toyota Auris suddenly stop working, the first thing we can do is check the state of the respective fuses…
What is the fuse layout of the Toyota Auris?
What is the fuse layout of the Toyota Auris?
Toyota Auris (2012-2018 / E180) If one of the devices in our Toyota Auris has suddenly stopped working, the first thing we can do is check the status of the respective fuses, whose …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos