Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, remove the dipped beam bulb from a fourth-generation Toyota RAV4. First, open the bonnet by pulling the release lever located under the dashboard on the driver's side. Next, disconnect the connector from the bulb behind the headlamp, then grasp the bulb and rotate it anti-clockwise to detach it from its socket and remove it. After that, disconnect the old dipped beam bulb from the holder and replace it with a new one. Finally, follow the reverse procedure to reassemble everything.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb on a Toyota RAV4
How to replace the front headlight bulb on a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The procedure for removing and replacing the front headlight bulb is very simple; let's see how to perform the operation on a Toyota RAV4. First, ope…
Replacing the Front Xenon Headlamp Bulb on a Toyota RAV4
Replacing the Front Xenon Headlamp Bulb on a Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Here are the instructions for removing and replacing the xenon front headlamp bulb on your Toyota RAV4. First, open the bonnet and remove the bulb pr…
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos