Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb of the Toyota Auris 2009

Model: Toyota Auris E150 - Years 2007-2012
Part: Headlight bulb

In this guide, we will discover how to correctly replace the front headlight bulb of your 2016 Toyota Auris. First, park the car safely and turn it off completely. Then, lift the front bonnet and remove the protective panel located at the bottom of the engine bay. Once done, disconnect the electrical pin at the back of the headlight and remove the faulty bulb. Finally, install the new bulb and reconnect the electrical pin. Refit the protective panel removed earlier, and you are finished.

Updated on 17 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Toyota Auris?
How to Replace the Front Headlight Bulb on a Toyota Auris?
Toyota Auris (2007-2012 / E150) You can replace the front headlight bulb on a Toyota Auris by opening the bonnet to access the components in the engine bay: here you will find the i…
How to Replace the Front Headlamp Bulb on a Toyota Auris?
How to Replace the Front Headlamp Bulb on a Toyota Auris?
Toyota Auris (2012-2018 / E180) To replace the front headlamp bulb on a Toyota Auris, open the bonnet to access the components in the engine bay. Locate the protective panel inside …
How to Replace the Front Headlight Bulb on the Toyota Auris
How to Replace the Front Headlight Bulb on the Toyota Auris
Toyota Auris (2012-2018 / E180) To replace the front headlight bulb on the Toyota Auris, open the bonnet to access the engine compartment. This will allow you to loosen the screws s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos