Instructions for Checking Engine Oil Level

Model: Toyota Prius Xw30, MK 2 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Engine oil

See other generations:

This video is currently unavailable

Checking the engine oil level is certainly a good habit that allows you to monitor any oil consumption. It is recommended to perform this check not only before embarking on a long journey or when the warning light on the dashboard comes on, but perhaps during every vehicle wash.

Open the engine compartment, locate the dipstick that allows you to check the engine oil level, and wait a few minutes after turning off the engine to allow all the oil to drain into the sump. Then, extract the dipstick, wipe it clean, reinsert it fully, and remove it again to check where the oil marks between the minimum and maximum marks (there is one litre of oil between the minimum and maximum).

Updated on 20 February 2026 by ScegliAuto

Other guides you may be interested in

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Engine Oil - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

Instructions for Checking Engine Oil Level

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos