Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Tacoma
  6. : To reset the maintenance light on the 2022 Toyota Tacoma.

Toyota Tacoma - Video tutorial

Model: Toyota Tacoma N300 - Years 2016-2024
Part: Instrument cluster
Operation: To reset the maintenance light on the 2022 Toyota Tacoma.

The manual reset of the maintenance light on the display of the instrument panel of your 2022 Toyota Tacoma is very simple to perform, and with the following guide, you will have no difficulty even if you don't have much experience in the field. First of all, enter the cabin and reach the driver's seat. Immediately after, start the dashboard and use the directional buttons located on the steering wheel to enter the car's menu. Then, go to the settings by selecting the "Settings" option and press "Maintenance reset". Finally, confirm the reset of the light, and you're done.


Posted on 26 September 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos