Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fuel pump in the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuel pump

In this tutorial, we can see how to disassemble the fuel pump in the Toyota Yaris, a very simple and fast operation. First of all, make sure that the key is not inserted, so that we can work safely. Then go to the back of the vehicle, remove the indicated plastic cover and unscrew the fixing bolts of the left rear seat. Then move the seat, open the circular cap and disconnect both the power connector and the fuel tubes. At this point, all that remains is to unscrew the large outer ring and extract the pump from the tank.

Posted on 12 October 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter of the Toyota Yaris.
How to replace the fuel filter of the Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel filter of the Toyota Yaris. First, let's ope…
How do you replace the fuel pump of the Toyota Yaris?
How do you replace the fuel pump of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the fuel pump of the Toyota Yaris, you need to loosen the screws that secure the rear seat bench of the car, so that it can be co…
How do you replace the fuel filter of the Toyota Yaris Verso?
How do you replace the fuel filter of the Toyota Yaris Verso?
Toyota Yaris (1999-2005 / Xp10) To replace the fuel filter of the Toyota Yaris Verso, you need to completely remove the rear seat bench so that you can access the underlying compone…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos