Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Service on a Toyota Highlander?

Model: Toyota Highlander Xu50 - Years 2014-2019
Part: Service warning light

In this tutorial, see how to reset the engine oil service on a Toyota Highlander. This operation is extremely simple and quick, to be performed only after completing all required scheduled maintenance tasks. Start by entering the cabin and turning on the ignition, then repeatedly press the "ODO/TRIP" button located on the speedometer until you reach the partial mileage count "Trip A". Once done, turn off the ignition and turn it back on while holding the same button, releasing it after the interval has been correctly reset.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure light on the Toyota Highlander?
How do you reset the tire pressure light on the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To reset the tire pressure warning light on the Toyota Highlander, you need to inflate the tires so that they reach the correct pressure value: this …
How do you reset the tire pressure light on the Toyota Highlander?
How do you reset the tire pressure light on the Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) You can completely eliminate the tire pressure warning light on the Toyota Highlander by inflating the tires to the recommended pressure value: this …
How to reset the tire pressure light on the 2016 Toyota Highlander
How to reset the tire pressure light on the 2016 Toyota Highlander
Toyota Highlander (2014-2019 / Xu50) If you own a Toyota Highlander (year 2016) and want to learn how to manually reset the tire pressure light, then simply follow the steps described be…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos