Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Engine Oil and Oil Filter of the Toyota Celica VVT-I

Model: Toyota Celica T230 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Engine oil

See other generations:
Video tutorial

Replace the engine oil and oil filter of the Toyota Celica VVT-I in simple and quick steps, performing the routine maintenance service. First, raise the vehicle and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew the oil filter cartridge, replacing it with a new one, as shown in the video.

At this point, open the bonnet and unscrew the oil filler cap, pouring in oil until you reach the maximum level indicated on the dipstick!


Updated on 27 August 2026 by ScegliAuto


Related tutorials

Toyota Celica (1999-2006 / T230) In this guide we will see the instructions that will allow us to dismantle the front headlights of the Toyota Celica. First, open the hood of the car…
Toyota Celica (1999-2006 / T230) Today, let’s discover the main instructions for removing the front seat of the Toyota Celica. First, open the front door of the vehicle and begin uns…
Toyota Celica (1999-2006 / T230) To replace the injectors on a Toyota Celica, open the bonnet to access the top of the engine block. Locate the connectors attached to the injectors a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Replace the Front Headlamp Bulb in a Kia Stonic?

Regardless of the type of bulb to be used, for example, the video shows how to install an H7 in a headlamp that involves similar work steps to the Kia Stonic, it is important to ensure that the instrument panel and lights are turned off. To replace the front headlamp bulb on the vehicle in question, open the bonnet, remove the plastic rear cap of the headlamp unit, unclip the metal fastener, and extract the bulb holder. Finally, simply remove the bulb to be replaced from the holder, insert the new one, and reassemble everything.

Watch the video!


by ScegliAuto

More videos