Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Warning Light in a Toyota C-HR?

Model: Toyota C Hr Ax10, MK 1, Ax50 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Tire pressure warning light

See other generations:
Video tutorial

Resetting the tyre warning light in a Toyota C-HR, as shown in this tutorial, is an extremely simple and quick operation. Before proceeding, ensure that you have restored the correct pressure in each tyre according to the manual.

Start by entering the cabin, then turn on the ignition. Using the directional buttons on the right side of the steering wheel, navigate to the settings menu.

Next, enter "Vehicle settings", then "Setup", and perform the reset by selecting "SET". Finally, restart the vehicle to complete the procedure.


Updated on 29 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on a Toyota C-HR?
How to Reset the Tyre Warning Light on a Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this tutorial, you will learn how to reset the tyre warning light on a Toyota C-HR, a very simple and quick operation. Before proceeding, ensure t…
How to Reset the Tyre Pressure Light on the Toyota CH-R
How to Reset the Tyre Pressure Light on the Toyota CH-R
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) Below are the instructions to reset the tyre pressure light on the Toyota CH-R; before resetting the TPMS sensors, ensure all four tyres are at the c…
How to Reset the Tyre Warning Light on the Toyota C-HR?
How to Reset the Tyre Warning Light on the Toyota C-HR?
Toyota C Hr (2016-2023 / Ax10, MK 1, Ax50) In this tutorial, you will see how to reset the tyre warning light on the Toyota C-HR, a very simple and quick operation, to be performed only after …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos