Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Light on the Toyota Highlander?

Model: Toyota Highlander Xu40 - Years 2008-2013
Part: Tire pressure warning light

To reset the tyre pressure light on the Toyota Highlander, inflate all the tyres to the correct pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once all the tyres are inflated, enter the cabin and turn on the ignition by rotating the key. Then, press and hold the SET button located under the steering column. Continue to hold it until the light is successfully reset.

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on the Toyota Highlander?
How to Reset the Tyre Pressure Light on the Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) To reset the tyre pressure light on the Toyota Highlander, first inflate the tyres to their correct pressure. Once the tyres are inflated, turn on th…
How do you reset the tire pressure light on the Toyota Highlander?
How do you reset the tire pressure light on the Toyota Highlander?
Toyota Highlander (2008-2013 / Xu40) To reset the tire pressure warning light on the Toyota Highlander, you need to inflate the tires so that they reach the correct pressure value: this …
How to Reset the Tyre Pressure Warning Light on a Toyota Highlander?
How to Reset the Tyre Pressure Warning Light on a Toyota Highlander?
Toyota Highlander (2020-2026 / Xu70) The procedure to reset the tyre pressure warning light on a Toyota Highlander involves first inflating the tyres to the correct pressure: this value …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos