Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the tire pressure light on the Toyota Highlander?

Model: Toyota Highlander Xu50 - Years 2014-2019
Part:

To reset the tire pressure warning light of the Toyota Highlander, you need to open the driver's door to read the recommended pressure values, which are shown on the sticker attached to the door frame. Once the tires have been inflated to the recommended pressure, you can press and hold the SET button located at the bottom left of the steering column. After a few seconds of holding the button, you can check that the warning light has disappeared from the instrument panel, and then you can turn off the key.

Posted on 18 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Toyota Highlander (2008-2013 / Xu40) To reset the tyre pressure light on the Toyota Highlander, inflate all the tyres to the correct pressure: this value is indicated on the sticker atta…
Toyota Highlander (2008-2013 / Xu40) To reset the tire pressure warning light on the Toyota Highlander, you need to inflate the tires so that they reach the correct pressure value: this …
Toyota Highlander (2020-2026 / Xu70) The procedure to reset the tyre pressure warning light on a Toyota Highlander involves first inflating the tyres to the correct pressure: this value …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos