Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on the Toyota Verso 2.0 D-4D

Model: Toyota Verso MK 4 - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Timing belt

See other generations:
Video tutorial

Below are the main steps useful for replacing the timing belt on the Toyota Verso with a 2.0 D-4D engine. First, open the bonnet of the vehicle and start by removing the alternator belt, loosening the tensioner; then remove the crankshaft pulley and the timing cover, aligning the two marks on the pulley and the engine block for the subsequent timing, as shown in the video.

At this point, replace and install the timing belt, following the video tutorial to the end for reassembly!


Updated on 9 September 2026 by ScegliAuto


Related tutorials

Guide to replacing the timing chain on a Toyota Verso
Guide to replacing the timing chain on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) This guide provides the main instructions on how to remove and replace the timing chain on a Toyota Verso; the timing chain on this petrol engine sho…
Replacement of Auxiliary Belt and Tensioner on Toyota Verso
Replacement of Auxiliary Belt and Tensioner on Toyota Verso
Toyota Verso (2009-2018 / MK 4) In this guide, you will learn how to replace the auxiliary belt and its tensioner on a Toyota Verso. First, locate the position of the belt tensioner…
Is there a way to reset the service light in the Toyota Verso?
Is there a way to reset the service light in the Toyota Verso?
Toyota Verso (2001-2007 / MK 2) In response to the question posed, we confirm that there is a way to reset the maintenance reminder light for the service due. We describe it below, …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos