Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the timing chain on a Toyota Verso

Model: Toyota Verso MK 4 - Years 2009-2018
Part: Timing belt

This guide provides the main instructions on how to remove and replace the timing chain on a Toyota Verso; the timing chain on this petrol engine should generally be replaced every 6 years or 150,000 miles, as stated by the manufacturer. Open the bonnet and begin by removing the cylinder head cover, starting with the spark plugs; then remove the timing cover located on the left to access the chain, as illustrated in the video. At this point, take the necessary references for replacing the timing chain, installing the original one.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Timing Chain on a Toyota Verso
Replacing the Timing Chain on a Toyota Verso
Toyota Verso (2009-2018 / MK 4) In this guide, we will discover the instructions and useful steps to remove and replace the timing chain on a Toyota Verso. First, lift the vehicle a…
Guide to Replacing the Timing Belt on the Toyota Verso 2.0 D-4D
Guide to Replacing the Timing Belt on the Toyota Verso 2.0 D-4D
Toyota Verso (2009-2018 / MK 4) Below are the main steps useful for replacing the timing belt on the Toyota Verso with a 2.0 D-4D engine. First, open the bonnet of the vehicle and s…
Where is the OBD2 port of the Toyota Verso located?
Where is the OBD2 port of the Toyota Verso located?
Toyota Verso (2009-2018 / MK 4) To have access to the OBD2 port of your Toyota Verso, you need just a few seconds. All you have to do is carefully read the steps described in the fo…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos