Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Activate the Traction Control on a Toyota Corolla?

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

If the TRC OFF light appears on the instrument cluster of the Toyota Corolla, it means that the traction control is deactivated and cannot be reactivated due to a generic electronic fault: to remove the light and reactivate the control, you will need to connect a diagnostic tool to the vehicle's OBD port.

This port is located under the steering column, and once connected, you will need to select the car model in question and its corresponding version: this will remove the error that causes the TRC OFF light to illuminate.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

How to disable the traction control of the Toyota Corolla
How to disable the traction control of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today we will discover the instructions that will allow us to deactivate the traction control (TRC) of the Toyota Corolla; however, it is recommended…
How to Disable the Traction Control on the Toyota Corolla
How to Disable the Traction Control on the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today's main steps will show you how to disable the traction control on the Toyota Corolla; however, it is advisable not to disable the traction cont…
How to replace the traction control button of the 2016 Toyota Corolla
How to replace the traction control button of the 2016 Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today we will explain how to replace the traction control button on a 2016 Toyota Corolla vehicle. We remove the lower cover of the gear shift boot a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos