Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Diagram and Layout for the Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fuse box

See other generations:
Video tutorial

This guide will show you how to access the fuse boxes on the Toyota Corolla, as well as the Auris. First, open the driver's side front door and start by removing the plastic cover located under the steering wheel; this will reveal the internal fuse box. There is another fuse box in the engine compartment, accessed by removing the plastic cover next to the battery; the fuse codes and their diagram are illustrated in the sliding guide, which can also be found in the vehicle's user and maintenance manual!


Updated on 18 September 2026 by ScegliAuto


Related tutorials

Diagram and Positioning of the Internal Fuse Box of the Toyota Corolla
Diagram and Positioning of the Internal Fuse Box of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) These brief and simple steps will show you how to access the internal fuse box of the Toyota Corolla, along with the diagram and layout. First, open …
Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Fuse Diagram and Layout for the Toyota Corolla 1.8 Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the diagram and layout of the fuses for the Toyota Corolla 1.8 Hybrid, following the instructions provided. First, open the bonnet and loca…
Diagram and positioning of the internal fuses of the Toyota Corolla
Diagram and positioning of the internal fuses of the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) The following steps will show us the layout and positioning of the internal fuses of the Toyota Corolla. First, we get into the car, front passenger …

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos