Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antenna in the Toyota Auris?

Model: Toyota Auris E150 - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Battery

See other generations:
Video tutorial

In this tutorial, you will see how to replace the antenna in the Toyota Auris, a very simple and quick operation. First, open the boot lid, then detach the seal in the upper right corner and subsequently the internal panel.

Next, locate the antenna power connector, disconnect it, and remove the antenna by unscrewing the corresponding fixing nut with a 22mm spanner. At this point, insert the replacement, tighten the nut, reconnect the connector, and secure both the panel and the boot seal.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

Installing Antenna on Toyota Auris
Installing Antenna on Toyota Auris
Toyota Auris (2012-2018 / E180) In this video tutorial, you will learn how to install the signal reception antenna on a Toyota Auris. To install it, first insert the antenna into th…
How to Reset the Service Light on Toyota Auris
How to Reset the Service Light on Toyota Auris
Toyota Auris (2012-2018 / E180) To manually reset the service light on your Toyota Auris, follow the procedure described in this guide. First, get into the car and turn on the ignit…
How to Replace the Rear Number Plate Bulb on a Toyota Auris?
How to Replace the Rear Number Plate Bulb on a Toyota Auris?
Toyota Auris (2012-2018 / E180) Good morning, to replace the rear number plate bulb on your Toyota Auris, start by opening the tailgate. Now, locate the bulb holder near the number …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos