Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Toyota Hilux?

Model: Toyota HiLux MK 8, An130, An120 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Service warning light

See other generations:
Video tutorial

In this tutorial, you will learn how to reset the service light on a Toyota Hilux, a very simple and quick operation to perform only after completing all required scheduled maintenance tasks. First, get inside the vehicle, then turn on the ignition.

Using the button located in the center of the dashboard, navigate to the "TRIP A" odometer display. At this point, turn off the ignition, then turn it back on while holding down the same button.

Keep it pressed until the interval is successfully reset.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a Toyota Hilux?
How to Reset the "Service" Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) Hello, today’s goal is to reset the "Service" light on our Toyota Hilux. Start by sitting in the driver’s seat. Once seated, press the ignition butto…
How to Reset the AdBlue Warning Light on a Toyota Hilux?
How to Reset the AdBlue Warning Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) To reset the AdBlue warning light on a Toyota Hilux, you need to refill the tank with the necessary amount of additive fluid. Open the hood and locat…
How to Reset the AdBlue Warning Light on a Toyota Hilux?
How to Reset the AdBlue Warning Light on a Toyota Hilux?
Toyota HiLux (2015-2024 / MK 8, An130, An120) To reset the AdBlue warning light on a Toyota Hilux, you need to refill the additive liquid by adding the necessary amount into the designated tank: …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos