|
Do it yourself
| |||
| ||||
Where are the fuses located in the Toyota Hilux?
Model: Toyota HiLux
An130, An120, MK 8
- Years 2015-2024
There are several fuse boxes in the Toyota Hilux: one in the engine compartment, located behind the car battery. To access the fuses, remove the cover by releasing the tabs. The other two fuse boxes are located behind the glove compartment: remove the glove compartment by pulling it first from one side and then from the other, remove the upper plastic in the passenger footwell by releasing the tabs, also remove the plastic on the left side of the passenger footwell (for left-hand drive vehicles, the plastic is on the right side of the passenger footwell) and the passenger side kick panel. Once the plastics are removed, you will see a small black fuse box, and if you look down, you will find another white fuse box (the plastics in the video have already been removed). Once you have located the fuse to be replaced, grab it with small pliers, remove it, check if the bridge inside the fuse is broken - if it is, the fuse needs to be replaced, otherwise it is still working. Once you have checked the fuse, take the new fuse and insert it in place of the old one; the new fuse should have the same amperage as the previous one.
Posted on 30 April 2024 by ScegliAuto
Video tutorial
Related tutorials
Toyota HiLux
(2015-2024 /
An130, An120, MK 8)
The fuses in the Toyota Hilux are divided between two fuse boxes located in the vehicle: the first is inside the cabin, in the dashboard area just be…
Toyota HiLux
(2015-2024 /
An130, An120, MK 8)
The fuses in the Toyota Hilux are divided among the designated fuse boxes installed within the vehicle: in this model, they are located inside the ca…
Toyota HiLux
(1997-2005 /
N150, N160, N140, N170)
All fuses in the Toyota Hilux are divided into specific fuse boxes installed in the vehicle: in this car model, you can find two boxes for holding th…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.326
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |