Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS on a Toyota RAV4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Tire pressure warning light

Today we will see how to reset the TPMS light on a fourth generation Toyota RAV4. The first thing to do to reset the tire pressure is to turn on the car's ignition and bring all four tires to the correct pressure as indicated by the manufacturer. Once this is done, turn off the ignition and press and hold the reset button located on the lower part of the dashboard above the pedals, then turn on the ignition of the vehicle without starting it, continue to hold down the reset button until the pressure light flashes three times to complete the job, finally restart the vehicle.

Posted on 2 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the TPMS Light on a Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Today, you will learn how to reset the TPMS light on a Toyota RAV4. The steps to follow are very simple and quick. The first step is to turn on the i…
How to Reset the TPMS Light on a 2010 Toyota RAV4
How to Reset the TPMS Light on a 2010 Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) To reset the TPMS light, which relates to tyre pressure, you must check and adjust the pressure of all four tyres. After completing this initial step…
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
How to Reset the Tyre Pressure Warning Light on a Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple guide, you will learn how to reset the tyre pressure warning light (TPMS) on a Toyota RAV4. Initially, when you turn on the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos