Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Reverse Light Bulb on a Toyota Tacoma

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

These brief and simple instructions will show you how to remove and replace the reverse light bulb on a Toyota Tacoma. First, move to the rear of the vehicle and start by removing the screws securing the taillight.

Then, disconnect the electrical connector for the bulbs. Next, remove the reverse light bulb from the housing and replace it with a new one that has the same base, as shown in the video.

Once the bulb is installed, reassemble the taillight by reversing the disassembly procedure!


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Replace the License Plate Bulb on a Toyota Tacoma
How to Replace the License Plate Bulb on a Toyota Tacoma
Toyota Tacoma (2016-2026 / N300) To replace the license plate light bulb on a Toyota Tacoma, access the underside of the rear bumper to disconnect the connector attached to the bulb.…
How to Replace the Brake Light Bulbs in a Toyota Tacoma?
How to Replace the Brake Light Bulbs in a Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) In this tutorial, see how to replace the brake light bulbs in a Toyota Tacoma. You will only need a 10mm socket wrench. Start by opening the tailgate…
How to replace the third brake light bulb on the Toyota Tacoma?
How to replace the third brake light bulb on the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the third brake light bulb on the Toyota Tacoma, you need to detach the headliner at the rear of the vehicle, also removing the clip locat…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos