Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Brake Light Bulbs in a Toyota Tacoma?

Model: Toyota Tacoma N300 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

In this tutorial, see how to replace the brake light bulbs in a Toyota Tacoma. You will only need a 10mm socket wrench.

Start by opening the tailgate, then unscrew the two mounting screws for the light located along the inner edge. In this area, you will find 4 bolts; the ones to remove are the second and the last, starting from the top. Once this is done, separate the light from the body, disconnect the power connector, and remove the old bulb by turning it counterclockwise.

To install the replacement, simply follow the reverse procedure.


Updated on 17 June 2026 by ScegliAuto


Related tutorials

How to Replace the Brake Light Bulbs on the Toyota Tacoma Mk1
How to Replace the Brake Light Bulbs on the Toyota Tacoma Mk1
Toyota Tacoma (1995-2004 / N170, N160, N150, N140, N190) This guide shows how to replace the brake lights on the Toyota Tacoma Mk1. Using a Phillips screwdriver, remove the four screws securing the rear lig…
How to Replace the Stop Switch in a Toyota Tacoma Pickup?
How to Replace the Stop Switch in a Toyota Tacoma Pickup?
Toyota Tacoma (2005-2015 / MK 2, N220, N240, N250, N260, N270) Replacing the stop switch in a Toyota Tacoma is a very simple and quick operation. Let's see how to proceed in this tutorial. Before doing this, ensu…
How to replace the third brake light bulb on the Toyota Tacoma?
How to replace the third brake light bulb on the Toyota Tacoma?
Toyota Tacoma (2016-2026 / N300) To replace the third brake light bulb on the Toyota Tacoma, you need to detach the headliner at the rear of the vehicle, also removing the clip locat…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos