Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout of the Toyota Prius?

Model: Toyota Prius MK 2, Xw30 - Years 2009-2015
Part: Fuse box

In this video we can see where the fuse boxes of the Toyota Prius are located and what the respective diagrams are, to consult in case we need to check the fuses of a malfunctioning device. We find the first box inside the passenger compartment, precisely in the lower left area of the dashboard on the driver's side. The second box is instead located inside the engine compartment, protected by the black plastic cover next to the battery. In case of faulty fuses, make sure to use replacements with equivalent specifications.

Posted on 14 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Fuse schema and positioning of the Toyota Prius
Fuse schema and positioning of the Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) The following steps will show us the layout and positioning of the fuse boxes of the Toyota Prius. First, we get into the car on the passenger side a…
What is the fuse diagram for the Toyota Prius?
What is the fuse diagram for the Toyota Prius?
Toyota Prius (2009-2015 / MK 2, Xw30) In this video we can see where the fuse boxes of the Toyota Prius are located and what are their respective diagrams, to consult in case we need to c…
Diagram and positioning of the fuses in the Toyota Prius
Diagram and positioning of the fuses in the Toyota Prius
Toyota Prius (2016-2023 / MK 3, Xw50) Following these brief steps, we will see how to locate the fuse diagram and their positioning on the Toyota Prius. First, we open the front driver's …

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos