Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the power steering fluid

Model: (Various brands) Various
Part: Power steering fluid

To perform this operation, you will need to release the bonnet from the lever and lift it to secure it with the prop rod. After consulting your vehicle's guide on which fluid to use for this type of hydraulic pistons, use a pipette to extract the fluid still present in the reservoir. Then, refill the reservoir with fluid until it reaches the indicated level. To expel all the fluid, turn the steering from side to side, and the job is complete!

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various Replace power steering fluid? Here’s how to proceed. Lift the front bonnet of the car, disconnect the power steering fluid return hose using a socket…
(Various brands) Various In this video, see how steering assistance reduces the effort needed to turn the wheels or manoeuvre the vehicle. Power steering decreases the effort…
(Various brands) Various In this video, we will look at the main causes of electric power steering malfunction: usually, in these cases, the red ESP warning light comes on, a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos