Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Power Steering Fluid

Model: (Various brands) Various
Part: Power steering fluid

Replace power steering fluid? Here’s how to proceed. Lift the front bonnet of the car, disconnect the power steering fluid return hose using a socket spanner (block the pipe to prevent fluid spillage). Connect a drain hose in place of the disconnected hose. Start the vehicle and allow the fluid to drain into a container. Flush the power steering system with the appropriate fluid. Disconnect the drain hose and fit the oil return hose. Top up the power steering reservoir with new fluid. Finally, test the operation of the steering wheel.

Updated on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, we will look at the main causes of electric power steering malfunction: usually, in these cases, the red ESP warning light comes on, a…
(Various brands) Various In this video, see how steering assistance reduces the effort needed to turn the wheels or manoeuvre the vehicle. Power steering decreases the effort…
(Various brands) Various When the term "steering" is used, it is often limited to identifying just the steering wheel, ignoring that the system that gives direction to our ve…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos