Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : What do i replace my car's power steering oil?

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: Power steering oil
Operation: What do i replace my car's power steering oil?

Changing the power steering fluid is a fairly standard procedure for all models. To change your car's power steering fluid, you will need: hoist, syringe to extract the fluid, old fluid drain pan, gloves and pliers. First remove the power steering cap and extract the old fluid with the help of a syringe. Then remove the pump hoses and drain the old liquid into the specially prepared drain pan. Now add a small amount of the new liquid to the tank. Then pour in all the new power steering fluid. Check the fluid level, which must be between the Min and Max marks on the reservoir. Start the engine and turn the steering wheel left and right to bleed the system.


Posted on 3 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - Where is the power steering oil found? Read Answer
    • Vari - Where is the power steering oil pan located? Read Answer
    • Vari - How many liters of oil does the power steering system contain? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos