Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Radiator

Model: (Various brands) Various
Part: Radiator

To perform this operation, you will need to drain the fluid from the radiator. Prepare a suitable container to place under the radiator to collect it. Now, start removing all the various inlet and outlet pipes connected to the radiator. Once done, remove the bolts securing it to extract it completely. If it cannot be removed from the top of the bonnet, you will need to remove the bumper and then the radiator, and that's it! Install the new radiator and pour the coolant into the appropriate container.

Updated on 27 February 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, you will learn how to remove a radiator and the thermostat valve from a car; let’s go through the main steps. First, remove the radiat…
(Various brands) Various Release and lift the bonnet. To access the radiator, you will need to remove the mechanical parts behind it that obstruct access. You will find a gui…
(Various brands) Various In this video, you will see how to clean a radiator. You will need a product like Bardahl Radiator Cleaner, which can be found on the Bardahl website…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos