Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car's immersion oil filter

Model: (Various brands) Various
Part: Oil filter

There are two types of oil filters, the cartridge oil filter and the immersion oil filter. In today's video, we will see how to replace the immersion oil filter independently. After draining the oil tank, we will need to remove the oil filter box with a wrench, extract the worn filter, and insert the new filter. Then we will mount the box in its housing and continue with topping up the oil in the tank, located next to the filter. This operation follows the same steps on many cars including Hyundai, Citroen, Volkswagen models, and so on.

Posted on 17 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change Engine Oil in Grand Voyager
How to Change Engine Oil in Grand Voyager
(Various brands) Various Let's see how to change the oil and filter in the Chrysler Grand Voyager. Lift the vehicle with a suitable jack, remove the lower engine cover, and l…
How to replace the engine oil and oil filter of the car
How to replace the engine oil and oil filter of the car
(Various brands) Various When the oil light comes on in your vehicle, it is necessary to proceed with the replacement of the motor oil and oil filter. This operation can be d…
How to Remove the Oil Filter Without the Special Tool
How to Remove the Oil Filter Without the Special Tool
(Various brands) Various In this video, see how to remove the oil filter from any vehicle without the special tool, using just two spanners and a length of string. Take one o…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the oil filter generally located? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos