Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the EGR valve on a 1.3 MultiJet vehicle

Model: (Various brands) Various
Part: EGR valve

Video tutorial

Modifying and removing the EGR valve on a 1.3 MultiJet vehicle is a task that can be done independently, but since it is an illegal intervention, we advise against doing it. To remove the valve, it is necessary to open the front hood and then remove the EGR connection tube to the manifold.

We then remove the EGR valve fittings using a wrench.

We can then disconnect the electrical cables and tubes connected to the valve. Using a metal brush, we clean the area and proceed with the vehicle modification.

After removing the tube, we can insert the cap on the top and bottom.


Posted on 12 April 2025 by ScegliAuto


Related tutorials

How to Clean the EGR Valve of Your Vehicle
How to Clean the EGR Valve of Your Vehicle
(Various brands) Various Symptoms of poor maintenance of the EGR valve include loss of engine power, noisy engine on startup, black smoke from the exhaust, and the engine war…
How to Use EGR Valve Cleaner
How to Use EGR Valve Cleaner
(Various brands) Various If you need to clean the EGR valve on your vehicle, the description below provides all the necessary instructions and information to carry out this t…
Bardhal EGR Valve Cleaner for Cleaning EGR Valves
Bardhal EGR Valve Cleaner for Cleaning EGR Valves
(Various brands) Various This video explains how to use Bardhal EGR Valve Cleaner for manual cleaning of EGR valves, and the procedure is performed when the valve has been ph…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much does the labor cost to replace the EGR valve? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos