Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. (Various brands)
    3. :
  3. Various
    4. : How to use the EGR valve cleaner

(Various brands) Various - Video tutorial

Model: (Various brands) Various
Part: EGR valve
Operation: How to use the EGR valve cleaner

If we need to clean the EGR valve on our car, in the description provided below, we will find all the necessary instructions and information to perform this intervention independently. First, open the engine hood and locate the throttle body on the left side of the engine base. Just below it, we find the EGR valve. Proceed to loosen the clamp securing the air duct to the valve and remove the duct. Then, start the engine and keep it at around 200 RPM, and spray the cleaner into the throttle body. Afterward, reassemble the duct.


Posted on 9 November 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vari - What does the Citroen P0401 error code indicate? Read Answer
    • Vari - How much does it cost to clean the car's EGR valve? Read Answer
    • Vari - Where is the EGR valve located? Read Answer
    • Vari - How much does it cost to have the EGR valve cleaned at a workshop? Read Answer
    • Vari - How much does it cost to clean the Egr valve? Read Answer
    • Vari - What is the price of cleaning the EGR valve? Read Answer
    • Vari - What is the price of the EGR valve for the 1.3 multijet? Read Answer
    • Vari - How does the egr valve work? Read Answer
    • Vari - How much does it cost to replace the egr valve? Read Answer
    • Vari - What causes problems with the egr valve on Toyota cars? Read Answer
    • Vari - What is the error code for egr valve malfunctions? Read Answer
    • Vari - How much does the EGR valve cost? Read Answer
    • Vari - What is the coto for replacing the EGR valve? Read Answer
    • Vari - How much does it cost to clean the EGR valve? Read Answer
    • Vari - Why is Far not available? Read Answer
    • Vari - What is the price of cleaning the EGR valve? Read Answer
    • Vari - What is the price for replacing the EGR valve? Read Answer
    • Vari - What is the egr heat exchanger used for? Read Answer
    • Vari - What to do when the particulate filter warning light comes on? Read Answer
    • Vari - What is the position of the EGR valve? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos