Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the car radio on Dacia and Renault vehicles

Model: (Various brands) Various
Part: Car stereo

After replacing the car battery, it is necessary to reset the car radio. Today we will explain how to perform this operation on Dacia and Renault vehicles. The radio reset code can be found on the warranty sheet or inside the instruction manual. Turn on the car's dashboard by turning on the radio. Using the numeric keys on the radio, enter the code which in our case is: "98 10". Since the code varies from vehicle to vehicle, you should not enter the code we used as you could lock your radio. After entering the code, the radio will start working as before.

Posted on 28 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the gear knob on Renault and Dacia vehicles
How to replace the gear knob on Renault and Dacia vehicles
(Various brands) Various To replace the gear knob on Renault and Dacia vehicles, we need to put the gear in neutral and then lift the gear lever boot using a flathead screwdr…
How to Reset the Bluetooth of the R Link System
How to Reset the Bluetooth of the R Link System
(Various brands) Various This video demonstrates how to reset the R Link infotainment system. The procedure is very simple and quick; just press the button with the house ico…
How to restore the factory settings of an Android 11 car stereo
How to restore the factory settings of an Android 11 car stereo
(Various brands) Various In this very short tutorial, we can see the entire procedure necessary to reset our Android car radio to factory settings, that is, perform a hard re…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos