|
Do it yourself
| |||
| ||||
Which are the cars that have an oil bath chain drive?
Model: (Various brands) Various
In this video we can find out which cars have a timing belt immersed in oil, not only those of the PSA brands, Citroen and Peugeot, but also some models of Ford and Volkswagen with a three-cylinder engine. These belts are actually made of a special rubber that should withstand high temperatures and oil chemicals; but unfortunately it didn't work out that way. In fact, the belts, being immersed in oil, form a sludge that clogs the oil pickup, and the oil can no longer reach the cylinder head, pistons, and all components that require lubrication. One very important thing is to use only the oil recommended by the manufacturer, and not be tempted by low-cost oils that can be found on the market. The youtuber also recommends using a tool to measure the belt to check its consistency and width, in order to determine its condition. But let's see on which cars these belts are found: PSA with Puretech 1.0 and 1.2 engines, both aspirated and turbocharged, Ford Ecoboost 1.0 production up to 2018. After this date, we find this solution for the oil pump on Ford engines; the same solution is also found on older Ford Common rail 1.8 engines and on Volkswagen engines, always Common rail 1.6 TFI and 2.0 TDI.
Posted on 25 June 2025 by ScegliAuto
Video tutorial
Related tutorials
(Various brands) Various
In this video, we talk about the now infamous oil bath timing belts: this type of belt was designed to last longer, but in reality it deteriorates in…
(Various brands) Various
The timing belt (or chain) is a fundamental component of your car. It synchronises the crankshaft with the cylinder head. Normally, in our engines, t…
(Various brands) Various
In this video, we can see how water pumps are actually nothing more than a pulley connected to a tree, which circulates the coolant liquid. It is a l…
Other guides you may be interested in
|
How to Open the Bonnet of a Renault Megane if the Lever is Broken?
If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.395
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |