Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How does the EGR valve work?

Model: (Various brands) Various
Part: EGR valve

Video tutorial

In this video, we are briefly explained how the EGR valve works: the part that controls the flow of exhaust gases is the actuator, which in this case is pneumatic and is activated by a depression created in the intake manifold, moving a diaphragm, which in turn opens or closes the valve.

However, it can also be electric, controlled by the engine's electronic control unit, which opens and closes the valve based on operating conditions.

In this case, the diaphragm moves when it receives the signal, causing the opening or closing of a throttle inside the EGR valve. This throttle regulates the amount of exhaust gas that is reintroduced into the combustion cycle.


Posted on 30 June 2025 by ScegliAuto


Related tutorials

How does the diesel EGR system work?
How does the diesel EGR system work?
(Various brands) Various In this short video, we see the operation of the diesel EGR system with the role of the MAF sensor and the throttle valve: the MAF constantly measure…
How to Clean the EGR Valve
How to Clean the EGR Valve
(Various brands) Various In this guide, learn how to clean the EGR valve using a specific product. When your diesel vehicle emits excessive fumes and the engine does not run …
How to remove the EGR valve on a 1.3 MultiJet vehicle
How to remove the EGR valve on a 1.3 MultiJet vehicle
(Various brands) Various Modifying and removing the EGR valve on a 1.3 MultiJet vehicle is a task that can be done independently, but since it is an illegal intervention, we …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - How much does the labor cost to replace the EGR valve? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos