Do it yourself
Frequently asked questions about cars and motorcycles

How to Start Your Car with a Booster

Model: (Various brands) Various
Part: Battery

If your car battery is flat and won't start, a portable booster (jump starter) is the quickest solution. Connect the red cable to the positive terminal of the battery and the black cable to the negative terminal (or to a metal ground on the chassis). Turn on the booster and wait a few seconds. Try to start the engine. If it starts, leave the engine running for a few minutes to recharge the battery. Then disconnect the black cable and finally the red one. The booster is a very handy device, especially if the battery shows no signs of failure until the moment it dies. The one shown in the video is a Bitzwolf BW-JAI, which can be found on eBay with code 377169987972 for £85.99 with free delivery. Remember that if the battery is very old (over 5 years), it may need replacing.

Posted on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video we see how to recharge the car battery with a booster. The booster is nothing more than a starter, a portable battery to which to conne…
(Various brands) Various In this video, our YouTuber gives some advice on what to do if you run out of AdBlue: first, DO NOT turn off the engine as this will prevent the syst…
(Various brands) Various This video shows how to reset the maintenance light on the 2013 Range Rover Sport. The procedure is very simple and quick. To reset the light, first …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos