Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change on Piaggio Ape

Model: (Various brands) Various
Part: Engine oil

Video tutorial

The iconic Piaggio Ape is a vehicle (available in three or four wheels) capable of going anywhere with impressive carrying capacity: it has become a classic and is now part of automotive history. Now, let's see how to change the engine oil on your Ape. It's actually very simple: lift your Ape with a hydraulic lift and unscrew the bolt for the oil drain, allowing it to drain thoroughly and, most importantly, without haste.

Now pour the new engine oil from the filler cap: the manufacturer recommends using a synthetic 10w40 oil for the best lubrication of all components.


Updated on 17 March 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Piaggio Ape Car 50
(Various brands) Various Replacing the battery of the Piaggio Ape Car 50 is not a complex task and takes only a few minutes to complete. Therefore, it can be easily done inde…
How to Replace the Clutch Cable on a Piaggio Ape 200
How to Replace the Clutch Cable on a Piaggio Ape 200
(Various brands) Various To replace the clutch cable on a Piaggio Ape 200, open the bonnet to locate the end of the cable connected to the clutch actuator. Disconnect this en…
How to Replace the Starter Motor on the Ape 50
How to Replace the Starter Motor on the Ape 50
(Various brands) Various In this video tutorial, see how to replace the starter motor on the Ape 50 by following a few simple steps: the first thing to do is to purchase a ne…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does the "Oil Insp" message mean? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos