Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace Your Car Battery

Model: (Various brands) Various
Part: Battery

Video tutorial

Is the battery in your car damaged? Here’s how to change it. Open the car door and pull up the engine compartment release lever located at the bottom left of the dashboard, then lift the front bonnet, disengaging the locking lever with your fingers.

Once the engine compartment is open, locate the battery to be replaced.

Remove the securing screws above the battery terminals, then the screws on the fuse box (if present). Take out the battery from the engine compartment and replace it with a new one (same voltage).

Start the car engine and check with a tester if the battery is charging.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

(Various brands) Various How to replace the car battery? This is a very simple operation; let's see how to change the battery. Open the car door and pull up the engine compar…
(Various brands) Various How do you change the battery in your car key? Let’s look at the disassembly and replacement of the damaged battery. Open the bonnet and locate the b…
(Various brands) Various To change the battery on the Yamaha Xmax, start by opening the front panel. Use a screwdriver to remove the 2 screws securing the cover. Once the cov…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where is the battery located on the Sym Jet X 125? Read answer
    • Vari - Where is the battery located on the Yamaha Xenter 125? Read answer
    • Vari - Where is the battery located in the Sym Jet X? Read answer
    • Vari - Where is the battery located in the Piaggio Beverly? Read answer
    • Vari - Where is the Sym Symphony 125 battery located? Read answer
    • Vari - Where is the battery of my Piaggio Medley 150? Read answer

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos