Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Fit Snow Chains

Model: (Various brands) Various
Part: Checks and maintenance

Start by laying the wheel chain flat on the ground, ensuring it doesn't tangle, keeping the yellow section near the tyre. Move the chain behind the tyre so it comes around to the other side. Next, lift it up and connect it to the upper inner part of the tyre. Once done, connect the outer part of the chain, and you will have fitted the first chain. To fit chains on the other tyres, simply repeat these steps, and you will have completed the installation.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

When to use snow chains and when to use snow socks
When to use snow chains and when to use snow socks
(Various brands) Various In this video we try to clarify for which situations chains are suitable and for which snow socks are suitable. Chains are the best option when there…
Jeko - Universal Snow Straps
Jeko - Universal Snow Straps
(Various brands) Various Universal snow straps, installation guide and practical demonstration of their effectiveness on snow and ice (tested on Renault Megane, Lancia Delta,…
Snow chains for vehicles that cannot be chained
Snow chains for vehicles that cannot be chained
(Various brands) Various Car manufacturers sometimes apply limitations on the possibility of mounting snow chains; this happens for safety or performance reasons and depends …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos