Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Coolant Replacement

Model: (Various brands) Various

Open the bonnet and prop it up with the support rod. Place a collection tray under the engine bay. Once you locate the coolant pipe, check if it has a tap; if so, simply turn it to start draining the fluid. If there is no tap, you will need to disconnect the pipe to break the circuit and let the coolant escape. Once all the fluid has drained, close the tap. Prepare about 3 litres of new coolant (this may vary depending on the car) and pour it in from the designated round container.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Antifreeze
How to Top Up the Antifreeze
(Various brands) Various Checking the level and topping up the antifreeze is a task that should be performed periodically on all cars, especially older and high-mileage ones.…
When to Change the Timing Chain!
When to Change the Timing Chain!
(Various brands) Various The timing chain should be changed at a certain mileage of the engine, as indicated in the car's maintenance manual. However, its lifespan, which is …
Mistakes to Avoid with Coolant
Mistakes to Avoid with Coolant
(Various brands) Various The main mistake to avoid is mixing different types of coolant; the second is using only water, which can corrode the heads and boil prematurely. Als…

    Frequently Asked Questions

    • Vari - Opinions on Nankang AW-6 Cross Season tyres Read answer
    • Vari - How does the BRC LPG switch work? Read answer
    • Vari - What problems can a Piaggio MP3 give? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos