Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove a Wheel

Model: (Various brands) Various
Part: Wheel

How do you remove a damaged wheel from the car? Let's look at the wheel removal and replacement process. Take the wheel removal kit which includes: jack, jack handle, screwdriver, wheel nut spanner (if available), telescopic spanner, spare wheel. Position the jack under the jacking point of the car (under the stiffest part of the chassis to avoid bending the metal due to excessive weight), lift the car slightly and loosen the wheel nuts. Now lift the car with the jack handle, unscrew the nuts and pull the wheel off. Fit the new wheel rim onto the hub with the respective nuts. Lower the car to the ground after fitting the wheel.

Updated on 4 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Front Wheel Bearing
Replacing the Front Wheel Bearing
(Various brands) Various Let's look at replacing the front wheel bearing of the car. Lift the car with a jack, remove the wheel to access the wheel hub. Undo the bolts of the…
How to Replace a Car Wheel
How to Replace a Car Wheel
(Various brands) Various Before you begin, put the car in first gear and engage the handbrake. Start by lifting the car with the jack provided in the basic tool kit. Next, un…
How to remove the rear wheel of the Tmax 500
How to remove the rear wheel of the Tmax 500
(Various brands) Various To remove the rear wheel of the motorcycle, proceed as follows: use a socket wrench to loosen the rear wheel axle (left side of the motorcycle). Take…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos