Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change a Diesel Fuel Filter

Model: (Various brands) Various
Part: Diesel fuel filter

How to change a diesel fuel filter? Follow these steps to replace the fuel filter. Lift the bonnet of the car and locate the diesel filter as shown in the video. Unscrew the screws on top of the filter (you can also use a socket spanner). Once the screws are removed, take the filter out of the housing (replace it with a new one). Finally, refit the filter into the housing (connect any hoses and wires if disconnected previously) and tighten the screws. Close the front bonnet after assembly. Start the vehicle several times until it runs smoothly.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove Petrol from a Diesel Car Fuel Tank
How to Remove Petrol from a Diesel Car Fuel Tank
(Various brands) Various In this video, see how to remove petrol that has been mistakenly added to the fuel tank of a diesel car. This is even worse if it is a Ford, which - …
How to Change the Fuel Filter of the Great Wall V240
How to Change the Fuel Filter of the Great Wall V240
(Various brands) Various In this video tutorial, you will see the main instructions that will allow you to remove and replace the fuel filter of the Great Wall V240. First, l…
How to keep the diesel particulate filter of our car clean
How to keep the diesel particulate filter of our car clean
(Various brands) Various In this video, we are suggested an additive that can help us keep the particulate filter of our diesel car clean: Bardhal's DPF Cleaner can be found …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos