Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Citroen
  4. :
  5. Citroen Various
  6. : How to reset the Citroen Relay oil warning light

Citroen Citroen Various - Video tutorial

Model: Citroen Citroen Various
Part: -board computer
Operation: How to reset the Citroen Relay oil warning light

If the oil change warning light continues to appear on the dashboard display of your Citroen Relay even though you have already done the change, you necessarily need a manual reset. The whole procedure takes a few seconds to complete. Make sure you have closed all the doors securely and then insert the key and turn it to position two. Immediately afterwards, keep both the brake pedal and the accelerator pedal depressed at the same time (for at least 15 seconds). At this point, turn off the ignition and turn it on again immediately afterwards. Release the two pedals and the oil warning light will finally be off.


Posted on 7 April 2024 by ScegliAuto

This video is currently unavailable


Resetting the engine oil change indicator on a Citroen Relay.
Citroen Citroen Various In this very short video tutorial today, we will see the procedure for resetting the service light, which indicates the remaining life of the engine
How to reset the oil service on the Citroen Relay van?
Citroen Citroen Various Resetting the oil service in the Citroen Relay van is a very simple and quick operation, let's see how to proceed in this tutorial. Before doing this
How to replace the clutch of Citroen Relay - Peugeot Boxer - Fiat Ducato 2.2
Citroen Citroen Various Today's main steps will show us how to disassemble and replace the clutch of the Citroen Relay 2.2 HDI, as well as the Peugeot Boxer and the Fiat Duc

Other guides that may interest you

How to activate the climate menu of the Audi A3

In this video we will see the procedure for activating the climate menu in our Audi A3. First let's go and turn on our car. We then turn our attention to the buttons below the stereo system. We can see that there is a small screen which shows the temperature. By simultaneously pressing the button on the left of the recirculation and the up arrow positioned on the right. In this way, the menu we were looking for will appear on the screen. By turning the knob on the left you can change the setting by choosing the desired one. We then press the two side buttons together and turn on the air conditioning.

Watch the video!


by ScegliAuto

More videos