Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Repair the Block Shaft Key?

Model: (Various brands) Various
Part: Key

Video tutorial

To repair the Block Shaft key, obtain an old key and use a hacksaw to cut it at the junction between the handle and the part that fits into the lock. Once you have the handle, position the Block Shaft key on it, marking with a marker where the key will be fixed.

By drilling a hole of appropriate size, you can secure the key to the handle by inserting a small screw inside; this will then need to be secured with a suitable nut from the other side.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How Does the Block Shaft Work?
How Does the Block Shaft Work?
(Various brands) Various The Block Shaft is one of the best mechanical anti-theft devices for cars, essentially a supplementary steering lock activated by a key that is impos…
How to Install the Block Shaft?
How to Install the Block Shaft?
(Various brands) Various To install the Block Shaft in your car, you need to remove the airbag, steering wheel, the electronics controlling the lights, and finally the steeri…
How to Engage and Disengage the Block Shaft Anti-Theft Device
How to Engage and Disengage the Block Shaft Anti-Theft Device
(Various brands) Various The Block Shaft device is a mechanical anti-theft system permanently installed on the steering column: it is essentially an additional steering lock …

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos