Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Block Shaft?

Model: (Various brands) Various
Part: Checks and maintenance

Video tutorial

To install the Block Shaft in your car, you need to remove the airbag, steering wheel, the electronics controlling the lights, and finally the steering column. Various spanners will be required to remove the respective screws and bolts.

Once all parts have been removed, you can proceed with the installation: the security cylinder is installed directly onto the steering column. There is also a wired control unit that allows key recognition and determines the unlocking of the steering wheel.

Conversely, to lock the steering wheel, you will need to turn the security key and remove both keys.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Repair the Block Shaft Key?
How to Repair the Block Shaft Key?
(Various brands) Various To repair the Block Shaft key, obtain an old key and use a hacksaw to cut it at the junction between the handle and the part that fits into the lock.…
How Does the Block Shaft Work?
How Does the Block Shaft Work?
(Various brands) Various The Block Shaft is one of the best mechanical anti-theft devices for cars, essentially a supplementary steering lock activated by a key that is impos…
How to Engage and Disengage the Block Shaft Anti-Theft Device
How to Engage and Disengage the Block Shaft Anti-Theft Device
(Various brands) Various The Block Shaft device is a mechanical anti-theft system permanently installed on the steering column: it is essentially an additional steering lock …

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Does the Sym Symphony 200cc have any known faults or problems? Read answer
    • Vari - What problems does the Keeway K-Light 125 have? Read answer
    • Vari - What are the main problems with the Keeway Superlight 125? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos