Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Quickly Replace Dashboard Bulbs in a Grand Caravan

Model: (Various brands) Various
Part: Dashboard

Video tutorial

Replacing the dashboard bulb in your car requires a few simple steps. As this is an electrical component, it is essential to work safely, so first ensure you disconnect the battery to avoid any current flow.

Locate the two small screws at the top of the dashboard and unscrew them using a small cross screwdriver. Do the same for the screws in the lower area.

Reconnect the battery to turn on the ignition and move the gear lever to the lowest position, then disconnect it again. Remove the plastic covers from the dashboard.

Unscrew the screws holding the entire speedometer in place and detach the whole piece from the connector. At this point, simply remove the old bulb and replace it with a new one. Finally, reassemble all the components and remember to reconnect the battery.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

Wiring Diagram for 7 Pin Trailer Socket
Wiring Diagram for 7 Pin Trailer Socket
(Various brands) Various This video shows the wiring diagram for the type "N" 7 Pin trailer socket. This is still the most common connector for towing and provides power to t…
How to Change the Interior Light Bulbs
How to Change the Interior Light Bulbs
(Various brands) Various To replace the blown bulbs in the interior light, use a screwdriver to lever between the cover of the light and its perimeter (without breaking the p…
How to Quickly Loosen and Tighten Wheel Bolts
How to Quickly Loosen and Tighten Wheel Bolts
(Various brands) Various Today, thanks to this video tutorial, you will learn a trick to quickly loosen and tighten wheel bolts. As we know, wheel bolts are often the hardest…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos