Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Quickly Loosen and Tighten Wheel Bolts

Model: (Various brands) Various
Part: Checks and maintenance

Today, thanks to this video tutorial, you will learn a trick to quickly loosen and tighten wheel bolts. As we know, wheel bolts are often the hardest to remove because they are usually rusted; the best way to loosen them is to use a drill and a bolt. Insert a bolt into the drill bit and place it on each bolt, activate the drill, and remove everything. Reassembly will be even quicker and easier using the same method. Once inserted, use a cross wrench to tighten further if desired.

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Unscrew the Fuel Pump Lock Ring
How to Unscrew the Fuel Pump Lock Ring
(Various brands) Various This video shows how to solve a common problem for many, which is how to unscrew the lock ring of the fuel pump in your car. First, you need a tool t…
How to Change a Car Wheel?
How to Change a Car Wheel?
(Various brands) Various To replace a car wheel, you need the appropriate tool kit containing the jack and the specific wheel nut key. Unfortunately, modern cars often do not…
How to replace the starter motor on the Yamaha X-Max
How to replace the starter motor on the Yamaha X-Max
(Various brands) Various To remove the starter motor, proceed as follows: loosen the air filter with a 5mm hex key, unscrew the 2 pins, move the air filter, remove the cap pr…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos