Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of the Kymco Ak 550

Model: (Various brands) Various
Part: Key

Video tutorial

To replace the remote key battery, follow these steps: obtain a small screwdriver, leverage the small gap on the short side to detach the rear cover of the remote. Using the same screwdriver, pry along the centre line of the inside of the key to open the two halves, granting access to the battery compartment.

Remove the old battery and replace it with the new one, ensuring the correct orientation (positive terminal facing up). Finally, reassemble the two halves and reattach the rear cover of the remote.


Updated on 25 June 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension on a Kymco Agility 125
How to Replace the Rear Suspension on a Kymco Agility 125
(Various brands) Various This tutorial shows how to replace the rear suspension on a Kymco Agility 125 in a few simple steps. The suspension is difficult to reach from behind…
How to Replace the Spark Plug of the Kymco Xciting S400
(Various brands) Various Although replacing the spark plug of the Kymco Xciting S400 may seem like a lengthy task to do on your own, the process, while laborious, is very sat…
How to change the display from Celsius to Fahrenheit on a Kymco scooter
How to change the display from Celsius to Fahrenheit on a Kymco scooter
(Various brands) Various In this video, you will see how to easily switch between degrees Celsius and degrees Fahrenheit on a Kymco scooter: on the multifunction display, amo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos