Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Scooter Starter Relay Works

Model: (Various brands) Various
Part: Fuse box

In this video tutorial, you will learn how the starter relay of the scooter works. First, you should know that this type of relay can be found in the scooter's starting system (the ignition switch has the start button; behind the start button, there are very small wires). The starter relay is located between the battery, the entire power system, the start button, and the starter motor. Thanks to this relay, it is possible to start a motor of a certain capacity even with a very small cable section. This relay supports up to 80 Amperes, allowing a maximum current of 80 Amperes to be applied.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Starter Motor from a Scooter
Removing the Starter Motor from a Scooter
(Various brands) Various In this tutorial video, you will learn how to remove and replace the starter motor in a generic scooter; the procedure may vary from scooter to scoot…
How to read the electrical diagram of a starter relay
(Various brands) Various In this drawing we see a standard 4-pin relay, marked with numbers: 30 is the power supply directly from the battery; 85 and 86 are the control coil,…
How to test a starter relay on a motorcycle
How to test a starter relay on a motorcycle
(Various brands) Various Learn how to test the starter relay (solenoid) on your motorcycle. The solenoid is a switch that allows a low current circuit (the start button) to c…

Other guides you may be interested in

    Frequently Asked Questions

    • Vari - Where to find the fuses of the Yamaha T-max 530 DX? Read answer
    • Vari - Where is the fuse box located on the Vespa GTS 125? Read answer
    • Vari - What is the "WSW" fuse? Read answer
    • Vari - What is the front wiper fuse? Read answer
    • Vari - Where are the fuses located on a Ligier X-Too? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos