Do it yourself
Frequently asked questions about cars and motorcycles

How to Quickly Adjust Your Car's Headlights

Model: (Various brands) Various
Part: Checks and maintenance

To quickly adjust your car's headlights, while waiting for a fine adjustment from the mechanic, do the following: position yourself in front of a wall, about 5 to 6 metres away. You should see that on the wall, the beam of light forms two wedges with the highest part towards the right. They must also be aligned with each other; they cannot be at different heights, as this would indicate incorrect adjustment. They must not point upwards either, as oncoming vehicles should not be dazzled by your lights. Another issue you might encounter is poor brightness. Nowadays, headlights are made of polycarbonate, which can become cloudy over time; if they are very cloudy, they will not let light pass through, and you won't see anything. In this case, treat them with cleaning kits available on the market (and our tutorials will help you do the job).

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

(Various brands) Various In this video, you can see how to perfectly adjust the beam of your car's front headlights. To make the adjustment, you will need a tape measure, som…
(Various brands) Various Adjusting the front headlights is a task that requires the intervention of a qualified operator and a specific tool called a headlight adjuster. Befo…
(Various brands) Various On almost all car models, the adjustment of the front seats is similar, if not identical. The first adjustment is to raise or lower the seat: to do t…

    Frequently Asked Questions

    • Vari - What does it mean when the message "insp" appears on a car? Read answer
    • Vari - Why doesn't the Becker Map Pilot start? Read answer
    • Vari - What problems does the Kymco Downtown 300i have? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos