Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Wheel of a Piaggio Ciao

Model: (Various brands) Various
Part: Wheel

The first step is to remove the left side panel. Use a coin to open the three pins on this side and the three pins on the opposite side by pressing the coin and turning it 90 degrees. For the right side panel, with the pedal down and the fuel tap forward, use the coin to remove the panel. To remove the chain, take off the chain tensioner using a 13mm spanner and insert it behind the tensioner where the nut is. Use pliers to unscrew the rear chain sprocket counterclockwise. Then, using a socket wrench, remove the frame mounting bolts, and on the other side, unscrew the nut holding the pulley. Open the rear brake on the other side and unscrew the two screws holding the hub; this will free the rear wheel.

Updated on 3 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
How to Remove the Carburettor from the Piaggio Si - Ciao - Garelli
(Various brands) Various Below are the instructions to remove and replace the carburettor of the Piaggio Si, as well as the Ciao and Garelli. First, place the central stand a…
How to Remove the Rear Wheel on a Piaggio Vespa 50
How to Remove the Rear Wheel on a Piaggio Vespa 50
(Various brands) Various The description below provides step-by-step instructions and the procedure to follow for removing and replacing the rear tyre on a Piaggio Vespa 50. …
How to disassemble the transmission pulley of the Piaggio SI
How to disassemble the transmission pulley of the Piaggio SI
(Various brands) Various Today we will see the instructions that will allow us to disassemble and replace the transmission pulley of the Piaggio SI, but also of the Ciao and …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos